The Crazyflie 2.0 pre-order has started!

We are really happy to announce that we are starting the pre-order for the Crazyflie 2.0 today! After spending nearly 10 months doing development, we have reached a point where we are very happy with the design and the performance. Now all we have to do is to kick off the production and that’s where the pre-order comes in.

During the next three weeks we will be taking pre-orders for the Crazyflie 2.0 and related products. After the three weeks has passed we will start the production and the current estimate for shipping the products is the second week of December. As a reward to users that want to help us out by pre-ordering our products, we are lowering the prices with about 15% until the 16th of October when the pre-order ends.

So, just to clarify:

  • Pre-order end: 16th of October
  • Estimated shipping: Second week of December

If you want to know more about the Crazyflie 2.0 and what it’s about, then have a look at the Crazyflie 2.0 product page. It explains a bit about the communication (Bluetooth LE and Crazyradio), the expansion boards and gives you an idea what you could use the platform for. The Crazyflie 2.0 developed with developers in mind, so it features thins like wireless firmware upgrade, real-time parameter setting/getting and data logging using graphs. To make it easier for developers to get going we provide a pre-installed virtual machine that contains most of our tool-chains for building firmware and software, as well as KiCad for the hardware design.

For the Crazyflie 2.0 pre-order we aren’t just making the Crazyflie 2.0 available, we are launching a full set of products to support it. Here’s the list of the main products and the expansion boards that are included in the pre-order:

  • Crazyflie 2.0: The next generation of our flying open development platform with lots of new features
  • Crazyradio PA: The same mechanical footprint and price as the current Crazyradio, but now with a power amplifier that we have tested to above 1km range (line-of-sight) with the Crazyflie 2.0
  • Debug adapter kit: An easy way to debug the nRF51 and STM32F4 on the Crazyflie 2.0 by using an adapter board for connecting a standard 20-pin/100mil JTAG or 10-pin/50mil Cortex-debug cable
  • LED-ring expansion board: Fly into the night in style with this expansion board featuring 12 bright RGB LEDs that can be individually controlled and two strong white front-facing LEDs
  • Qi expansion board: Charge your Crazyflie 2.0 without any wires with this inductive charging expansion board using Qi
  • Breakout expansion board: Easy solderless prototyping with a board designed to fit a breadboard to try out your designs on the ground
  • Prototype expansion board: With space for prototyping and access to all the pins in the Crazyflie 2.0 expansion port there’s lots of possibilities with this board

We are also including all the spare parts in the pre-order to make sure that everyone gets a chance to get what they need together with their Crazyflie 2.0. Here’s the list of parts:

For the release we wanted to make a video explaining a bit the new platform, but since we have been really short on time we’re not done yet. Instead we are publishing a short video showing the Crazyflie 2.0 in action together with the LED-ring expansion board. The video also features the traffic light hack we did a few weeks ago.

Have a look at the Getting Started page for the Crazyflie 2.0 for assembly instructions or the wiki documentation for the project to see how to assemble the new solderless Crazyflie. There’s also some Expansion port documentation available as well as User Guide. We are still working on filling out more of the documentation, so bare with us. With the hardware completed we are now refocusing on the firmware and software. We have built in lots of neat features into the new Crazyflie 2.0 hardware that we now need to add software support for. So over the coming months we will be working on the iOS/Android apps and the Crazyflie PC client as well as the firmware. We will of course keep everyone updated of the progress here on our blog. Once the Crazyflie 2.0 products start shipping we will publish all the code and hardware design on our GitHub.

Starting with the pre-order of the Crazyflie 2.0 we are also lowering the price for the current version of the Crazyflie. The Crazyflie Nano Quadcopter 10-kit is lowered from $149 to $116 and the bundle with the Crazyradio is lowered from $179 to $146. So if you can’t wait until December then have a look at the current version over at Seeedstudio.

8 comments on “The Crazyflie 2.0 pre-order has started!

  • Hi there,

    I just tried to place a pre-order but both your credit card processing system and paypal didn’t work for me. I also just used the same card on another site and it went through. Can you confirm that your payment system is online?



    • Hi Andy,
      Seeedstudio is handling the shop and the payment details, can you try to contact them about it? If you still have problem tell us and we can contact seeeds as well.

  • Hi there,
    Just wanted to confirm that the PA isn’t included in the pre-order and needs to be ordered separately?
    Is there anything else that is required so the pack contains everything RTF?

  • I can’t find the cart to checkout my purchase at seed studio. Lol. I suspect their banner is blocking it. Anybody tell me the link to the cart. I suspect I got about 20 Pre-orders in there by now.

Leave a Reply

Your email address will not be published. Required fields are marked *